Four Basic Models:
Single-Hung, Double-Hung, Slider and Picture Windows. Series S-3025/S-3015/S-4025 windows have been structurally tested by Southwestern Test Laboratories in Fort Worth, Texas, and thermally tested by National Certified Laboratories in York, Pennsylvania. Constructed in accordance with AAMA specifications.
Thermalized:
Large, thermal-fill cavity with 1/4" poured polyurethane in all frames and sash members. Rigid vinyl thermal insulator on center appendage of main frame.
Full-Perimeter Weather Stripping:
For an efficient, positive seal, all windows feature poly-pile, fin-seal and soft vinyl fin weatherstrip.
Weathertight Construction:
Inserts and main frames have coped corners- no miters.
Latch Rails:
Hollow extrusion design in meeting rail, except SH-B1-HP60.
Series:
Aluminum windows shall be models S-3025, S-3015 or S-4025. Single-Hung window shall conform to AAMA specifications as follows: SH-B1-HP 60, SH-A2-HP 60 and SH-A2-HP 60 Forced Resistance Tested. S-4025 sliding windows shall meet AAMA specifications for HS-B2-HP 50 and HS-A2-HP 50.
Material:
Main frames and sash members shall be constructed of 6063-T5 extruded aluminum alloy having a minimum wall thickness of.050 (within commercial tolerances), except for A2 sills which shall be .062 thick.
Glazing:
All windows shall be glazed with 3/4" insulated glass using a wrap-around, soft vinyl gasket. Top sash shall be a glazed insert, rather than glazing glass into frame. Fixed lite units shall be interior removable stop glazed.
Weather Stripping:
Top sash shall be weatherstripped with fin-seal weatherstrip. Bottom sash shall be double weatherstripped with a combination of soft vinyl fin weatherstrip and poly-pile. Vinyl weatherstrip shall be equal to commercial standard CS230-60.