L & M Window Glass & Doors
 
Call Us Today! 505-345-1016
3828 2nd St NW Albuquerque NM 87107 | landmwindows@gmail.com
 
Find Us On:
 
 
 
 
 
 
 
 
 
Living Room Windows—Expert Window Installation in Albuquerque, NM
 

Custom Windows and More in Albuquerque, NM

L & M Window Glass & Doors in Albuquerque, NM can make your home more energy-efficient, environmentally-friendly, and more elegant with services including repair, replacement, and installation of:
 
  • Windows
    • Custom
    • Vinyl
    • Double hung
 
  • Fiberglass
  • Thermal-break
 
 
 
 
We specialize in customized windows, able to fit a window to any opening! We manufacture thermal-break aluminum windows and carry 4 colors which are baked on enamel.
We also offer:
 
  • Window glazing
  • Reglazing
  • Frame resealing
 
  • Stucco repairs
  • Stucco replacement
  • Plastering services
 
Brands we use include:
 
Office Window—Expert Window Installation in Albuquerque, NM
 
Contact us now for a FREE estimate and you can be sitting in your sunroom or gazing out your bay window in just a few days!
 
 
Construction Standard Sizes—Expert Window Installation in Albuquerque, NM
Standard Colors—Expert Window Installation in Albuquerque, NM
 
Four Basic Models: Single-Hung, Double-Hung, Slider and Picture Windows. Series S-3025/S-3015/S-4025 windows have been structurally tested by Southwestern Test Laboratories in Fort Worth, Texas, and thermally tested by National Certified Laboratories in York, Pennsylvania. Constructed in accordance with AAMA specifications.
Thermalized: Large, thermal-fill cavity with 1/4" poured polyurethane in all frames and sash members. Rigid vinyl thermal insulator on center appendage of main frame.
Full-Perimeter Weather Stripping: For an efficient, positive seal, all windows feature poly-pile, fin-seal and soft vinyl fin weatherstrip.
Weathertight Construction: Inserts and main frames have coped corners- no miters.
Latch Rails: Hollow extrusion design in meeting rail, except SH-B1-HP60.
Series: Aluminum windows shall be models S-3025, S-3015 or S-4025. Single-Hung window shall conform to AAMA specifications as follows: SH-B1-HP 60, SH-A2-HP 60 and SH-A2-HP 60 Forced Resistance Tested. S-4025 sliding windows shall meet AAMA specifications for HS-B2-HP 50 and HS-A2-HP 50.
Material: Main frames and sash members shall be constructed of 6063-T5 extruded aluminum alloy having a minimum wall thickness of.050 (within commercial tolerances), except for A2 sills which shall be .062 thick.
Glazing: All windows shall be glazed with 3/4" insulated glass using a wrap-around, soft vinyl gasket. Top sash shall be a glazed insert, rather than glazing glass into frame. Fixed lite units shall be interior removable stop glazed.
Weather Stripping: Top sash shall be weatherstripped with fin-seal weatherstrip. Bottom sash shall be double weatherstripped with a combination of soft vinyl fin weatherstrip and poly-pile. Vinyl weatherstrip shall be equal to commercial standard CS230-60.
 
Hardware: Sash shall be fitted with a die-cast cam type lock at the center of the meeting rail. Sash shall be equipped with block and tackle balances and feature side takeout for reglazing. Slider windows shall be equipped with ball bearing rollers. All screws and fasteners shall be stainless steel or cadmium-plated or zinc-plated per AST specification specification A-164-55 or A-165-55.
Finish: All exposed surfaces of all aluminum members shall be clean and free from serious blemishes. Painting shall be accomplished with an electrostatic process using a polyester baked enamel finish. Hard-coat finishes available on commercial models.
Screens: Screens will be provided when specified with roll-formed frames and will be spring-loaded for retention
 
Special shape windows that L & M manufacture
Special Shape Window—Expert Window Installation in Albuquerque, NM
Info about Patio Doors
L and M windows have an energy saving design. These doors have a built-in polyurethane thermal-break that separates interior and exterior surfaces on the main frame and panels to cut heat loss in winter and heat gain in summer. Since there is no metal to metal contact, this design reduces condensation.
 
Window—Expert Window Installation in Albuquerque, NM
 
Featuresof modelsS-1100/1125
• 5/8" insulated glass
• Tandem ball bearing adjustable rollers
• Woodgrain handle • Positive interlock with fin seal
• Doors meet “forced entry” standards
• Hollow, double thermal-break pull rail
• Welded marine gasket
• Full double-perimeter weather-strip
• Roll form type screen
S-1100/1125 Options:
• Tinted glass
• Low E/Argon
• Internal grids
• Exterior key lock
• Heavy duty screen
• Auxiliary lock
 
 
Window Features—Expert Window Installation in Albuquerque, NM
 
Features of S-1300/1325
• 3/4" Insulated glass
• Heavy duty screen
• European style black finish handle
• Tandem ball bearing adjustable rollers
• Positive interlock with fin seal
• Doors meet “forced entry” standards
• Hollow, double thermal break pull rail
• Welded marine gasket
• Full double-perimeter weather-strip
 
 
 
Doorway—Expert Window Installation in Albuquerque, NM
Options:
Colors
Color Option—Expert Window Installation in Albuquerque, NM
 
Note: 1300/1325 and 2000/2025 are not available in hunter green.
Hardware
• Brass-plated hardware
• Tinted glass
• Low E/Argon
• Internal grids
• Exterior key lock
• Auxiliary lock
 
 
 
Color for Storm Doors—Expert Window Installation in Albuquerque, NM
 
Info for storm Doors and storm windows
Heavy duty storm and screen doors
We offer our storm and screen doors in both 1” and 1-1/4” thicknesses. There are a wide variety of styles and options ranging from full removable glass to self-storing glass panel options. Take a look. There's something that will complement your home